New Machines (1601)
Разборка:
1) В начале снимите сам агрегат с автомобиля и не забудьте подготовить место где вы будете работать,
различного рода грязи и особенно воды по близости быть не должно, вить если она попадет на контакты
то просто в негодность их после этого приведёт, более подробно процесс снятия распределителя вы сможете
увидеть в статье под названием: «Замена распределителя зажигания на автомобиля».
Купить продать трамблер на доске объявлений www.matrixboard.ru
Разобрать и собрать трамблер
2) Теперь когда распределитель у вас снят, отсоедините с него верхнюю крышку для этого два боковых
фиксатора которые её крепят подцепите (Проще всего отвёрткой их подцапать, руками они не всегда отсоединяются),
после того как она отсоединена, посмотрите на контакты (Их всего четыре, для наглядности некоторые стрелками на
маленьком фото указаны) на них не должно быть окисления и они должны быть яркого цвета, и кстати ещё центральный
стержень проверьте, нажмите на него пару раз он не в коем случае не должен быть сломан и ходить должен мягко без каких либо заедания,
он синей стрелкой на маленьком фото указан.
Химия для очистки контактов трамблера www.uzo.matrixboard.ru
Разборка трамблера
Поддевание при помощи отвёртки боковых держателей которые крепят крышку к распределителю и её снятие
Разобрать и собрать трамблер
Примечание!
Модернизация трамблера и системы зажигания www.freshdesigner.ru
Регулировка опережения зажигания
Кроме того на самой крышки трещин быть никаких не должно и она должны быть цела, то есть не иметь никаких углублений и вмятин,
кроме этого для наглядности чуть ниже показана крышка от совсем другого автомобиля, но суть не в этом, посмотрите на её контакты,
данные контакты окислены чтобы вы уже могли понять как это выглядит, их можно надфилем зачистить до блеска (Минут 10-15 работы)
и она у вас начнёт опять работать, или можно просто на новую заменить если контакты уже не очищаются!
Регулировка искры
Купить химию для ультразвковой очистки деталей двигателей внутреннего сгорания и электрики www.matrixplus.ru
Замена трамблера
Mobile shredders from Badger are capable of processing all types of C&D material including wood and reinforced concrete. Impact can package mobile or stationary systems to include reduction, sorting, and handling for turn-key C&D systems.
EPS Foam Recycling Systems from RecycleTech reduce large quantities of loose foam scrap into dense ingots at a ratio of up to 90:1. This can reduce foam waste disposal costs by as much as 80%.
Glass Aggregate Systems makes complete systems for reduction and screening of bottles, full bottles, windshields, and plate glass. Labels, metal caps, and plastic caps are removed and separated in bottle systems. In windshield systems, laminate is separated and processed to a marketable form.
Forrec Tire Recycling Systems process car and truck tires into marketable end products including Tire Derived Fuel (TDF), various sizes of rubber granules, clean steel, and nylon fiber. Advanced air handling systems control rubber dust providing a clean, safe recycling operation. Systems can be implemented in phases allowing a recycling business to grow according to volume and end product needs while preserving capital.
A Screen Machine portable stacking conveyor is the perfect solution for any size operation. Being able to stockpile large amounts of material in high and wide piles without constantly repositioning your equipment is key to uninterrupted productivity. SMI's new 60' (18.3m) portable tracked conveyor is powered with a self-contained diesel module. Radial stacking conveyors are also available. Impact also represents the Titan Industries line of stationary conveyors and custom conveyors. Titan has a solution for any industrial application.
The Remu Big Float is a new type of machine for marshlands and shallow-water applications. It gets you to areas where traditional machines have never thought of going. The Big Float travels from the transport platform to the work site on its tracks - no hoists are required. The pontoons ensure the floatability of the machine in the water and safe travel on soft marshlands.
We offer optical sorters from Pellenc Selective Technologies that are designed to separate mixed waste streams like MSW, C&D, Industrial waste, E-Scrap, and End of Life Vehicles. Pellenc optical sorters can separate materials like plastic, paper, glass, wood, and metal by color or type of material.
Remu screening buckets fit all sizes of skid steer loaders, wheel loaders, and excavators. While Remu screening buckets shine in back filling and top soil applications, they can also handle difficult materials such as compost, mixed materials, demolition waste, clay, asphalt, and other sticky materials. Maximize your on-site capabilities by making a screening bucket part of an attachment system that includes quick couplers, crushing buckets, or other attachment tools.
Vibratory screening plants from Screen Machine are designed to screen aggregates, producing three different sizes of product simultaneously. Jobsite refuse such as wood, metal, plastic and more can be separated easily. Concrete and asphalt can also be recycled and reused. SMI's trommel screens are self-contained, diesel powered, track mounted portable screening plants designed to separate topsoil, compost and green waste type products.
Screen Machine Industries tracked impact & jaw crushing plants can be very useful tools in mining, aggregates, road building, demolition/recycling, and more. The waste generated from jobsites in many cases can be recycled, repurposed and reused to create other useful products and reduce landfill tipping fees.
Eco-Crusher rotary & jaw crushing buckets shine in on-site applications where volumes below 4,000 tons do not justify the mobilization expense of a large crushing plant. With models to fit skid steer loaders, wheel loaders, and excavators, you can utilize existing fleet machines that are already on the job. Maximize your on-site capabilities by making a crushing bucket part of an attachment system that includes quick couplers, screening buckets, or other attachment tools.
RecycleTech's EPS Foam Densifiers utilize high volume extrusion technology. Plastic foam scrap is placed into the hopper of the machine where it is crushed into small chunks. The pieces drop into an auger/screw where the material is heated and extruded into ingot for collection. The process is safe, clean and does not emit harmful emissions.
Glass Aggregate Systems offers a line of glass breakers with models ranging from .25 tons to 20 tons per hour. The glass breakers are typically used as part of a total glass recycling system, but can be utilized as stand-alone reductions machines also.
Granulators
Rotating blade granulators are used for grinding mixed plastic material waste produced in injection molding, extrusion, blow molding, and thermoforming. Forrec granulators are designed to provide maximum performance, energy savings, safety compliance, and minimal noise.
Sturdy, efficient and precise, single shaft grinders perform best in operations which require uniform control of output material dimensions. Equipped with interchangeable rotor plates and sizing screens, they are used in the management of any type of solid waste that does not contain large ferrous or metallic materials.
Shredders
Forrec stationary dual shaft shear shredders with counter-rotating shafts can be used for the reduction of any type of solid waste. They are the workhorse of the recycling industry. Impact also offers mobile track shredders from Badger that are designed to reduce the toughest materials like reinforced concrete, in addition to C&D waste, tires, and wood waste.
